Original Fujitsu FTP-628MCL401 Thermal Printer Mechanism
The FTP-628 MCL Series are battery driven high-speed printers with a 2-inch paper width equivalent.
The FTP-628 MCL Series can be used for a variety of applications, such as portable terminals, POS, banking terminals, and measurement and medical equipment.
• Ultra low profile
Height 21.8 mm, width 81.2 mm, depth 42.2 mm
• High speed printing
It can print at 80 mm/s (640 dotlines/s) at 9.5V head voltage maximum
• Auto Cutter
Full cut type and partial cut type printers are available by user selection.
• Easy paper loading
Our unique platen release mechanism allows a wide paper route even if the printer is ultra-compact, so paper can be easily inserted.
• Multifunctional die-cast form
Wide operating temperature range, long continuous printing, high ESD absorbtion and discharge of static electricity vibration and shock resistant.
• RoHS compliant
• Cash registers
• EFT POS terminals
• Gas pumps
• Portable terminals
• Measuring instruments and analysers
• Taxi meters
Item |
Specifications |
||
Part number |
FTP-628MCL401#01/451#01 |
||
Printing method |
Thermal-line dot method |
||
Dot structure |
384 dots/ine |
||
Dot pitch (Horizontal) |
0.125 mm (8 dots/mm)—Dot density |
||
Dot pitch (Vertical) |
0.125 mm (8 dots/mm)—Line feed pitch |
||
Effective printing area |
48 mm |
||
Number of columns |
ANK 32 columns/line (maximum 12 x 24 dot font) |
||
Paper width |
58 mm |
||
Paper thickness |
60 to 85 u m(some paper in this range may not be used becauseof paper characteristics) |
||
Printing Speed |
Maximum 80mm/sec. (640dotline/sec.) at 9.5V*1Maximum 60mm/sec.(480 dotline/sec.)at 8.5V*2 |
||
Character types |
Alphanumeric, kana:159 typesInternational characters:195 typesJIS Kani (Kanji CG loaded board):about 6800 types |
||
Character, dimensions (WxH), numberof columns |
12x 24 dots,(1.5x 3.0 mm),32 columns: ANK24 x 24 dots,(3.0x 3.0 mm),16 columns: ANK8 x 16 dots,(1.0x 2.0 mm), 48 columns: ANK16x 16 dots,(2.0x 2.0 mm),24 columns: ANK |
||
Interface |
Conforms to RS232C/Centronics |
||
Powersupply |
For print head |
4.2 to 9.5VDC,2.4A(Head voltage 7.2VDC, resistance 176Q,259C, concurrent applied dots 64 dots) |
|
For motor |
4.75 to 9.5VDC,0.75A maximum |
||
For cutter motor |
4.75 to 9.5VDC,1.0A maximum |
||
For logic |
3.3 or 5VDC +/-10%,0.1A maximum |
||
Dimensions |
Mechanism with cutter |
81.2x 42.2x 21.8 mm (WxDxH) |
|
Interface board |
70x 60 x12 mm |
||
Weight |
Mechanism with cutter |
Approximately 100g |
|
Interface board |
Approximately 25g |
||
Life |
Head |
Pulse resistance:100 million pulses/dot (under our standardconditions); Abrasion resistance: paper traveling distance 50km(print ratio: 25% or less) |
|
cutter |
500,000 cuts |
||
Platen |
5,00 times (open/close) |
||
Operatingenvironment |
Operating temperature* |
+5° to +40°℃ (guarantee) |
|
Operating humidity |
20 to 5% RH (no condensation) |
||
Storage temperature |
-20° C to +60° C(paper not included) |
||
Storage humidity |
5 to 90% RH (no condensation) |
||
Detectionfunction |
Head temperaturedetection |
Detected by thermistor |
|
Paper out/mark detection |
Detected by photo-interupter |
||
Platen release |
Detected by sliding switch |
||
Movable blade |
Detected by photo-interrupter |
||
Recommended thermal sensitive paper |
High Sensitive Paper:TF50KS-E4 (Nippon Paper) |
||
Standard paper: TF60KS-E(Nippon Paper), |
|||
Medium Life Paper:TF60KS-F1, |
|||
Long Life Paper:PD160R-N (Oji Paper), |