Original Fujitsu FTP-628MCL701 Thermal Printer Mechanism
The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer, printing on 2-inch wide paper (58mm) where platens are removable. Our original platen removal mechanism improved paper loading and maintenance.
The FTP-608 MCL series can be used for a variety of applications, such as portable terminals, POS, ticket issuing terminals, label printers, banking terminals, and measurement and medical equipment.
• Easy loading type
Our original platen removal mechanism improved paper loading and maintenance.
• Ultra compact
701: Height 31.5 mm, width 67.5 mm, depth 20.5 mm
751: Height 32.5 mm, width 67.5 mm, depth 19.8 mm
• High speed printing
It can print at 80 mm/s (640 dotlines/s) maximum by using Fujitsu's unique head drive control.
• High resolution printing
8 dots/mm of resolution printing is possible.
• RoHS compliant
• Cash registers
• EFT POS terminals
• Gas pumps
• Portable terminals
• Measuring instruments and analysers
• Taxi meters
Item | Specifications | |||
Part number | FTP-628MCL701/751 | |||
Printing method | Thermal line dot method | |||
Dot structure | 384 dots/line | |||
Dot pitch (horizontal) | 0.125mm (8dots/mm) – Dot density | |||
Dot ptich (vertical) | 0.125mm (8dots/mm) – Line feed pitch | |||
Effective printing area | 48 mm | |||
Number of columns | ANK 32 columns/line (maximum 12 x 24 dot font) | |||
Paper width | 58 mm +0/-1 | |||
Paper thickness | 60 to 100pm (some paper may not be used because of characteristics) | |||
Printing speed | Maximum 80mm/sec. (640 dot lines/sec.) 8.5V | |||
Interface | FTP-628DSL600 series | |||
Character types | Alphanumeric, katakana: International and special characters: OCRI OCRIII OCRIV Extended numeric JIS Kanji level 1, level 2, non-Kanji (supported only when Kanji CG is mounted) | 159 types 195 types 103 types 23 types 103 types 11 types about 6,800 types | ||
Character, dimensions (WxH), number of columns | Half size Full size Half size Full size OCRI OCR III OCRIV Extended numeric | 12 x 24 dots, (1.5 x 3.0 mm), 32 columns: ANK 24 x 24 dots, (3.0 x 3.0 mm), 16 columns: ANK, Kanji 8x 16dots, (1.0x 1.0 mm), 48columns: ANK 16 x 16 dots, (2.0 x 2.0 mm), 24 columns: ANK, Kanji 24 x 40 dots, 16 columns 24 x 48 dots, 16 columns 36 x 60 dots. 10 columns 24 x 48 dots, 16 columns | ||
Item | Conforms to RS232C/USB | |||
Operating Voltage | For print head | 4.2 VDC to 8.5 V, average current 0.87A (0.98), peak value Printing ratio: 12.5%, printing speed 500mm/sec. at 7.2V | ||
For motor | 4.2 VDC to 8.5 V, 1 A maximum | |||
For logic | 3.0 to 5.25 VDC, 0.1 A maximum | |||
Dimensions | Printer mechanism | 701 | 67.5 x20x 31.5 mm (WxDxH) | |
751 | 67.5 x19.8x 32.5 mm (WxDxH) | |||
Interface board | 70 x 52 x 20 mm (WxDxH) | |||
Weight | Printer mechanism | 701 | Approximately 40g | |
751 | Approximately 46g | |||
Interface board | Approximately 22g | |||
Head life | Pulse resistance: 100 million pulses/dot (under our standard conditions). Abrasion resistance: paper traveling distance 50km (print ratio: 25% or less) | |||
Operating environment | Operating temperature* | 0°C to +50°C | ||
Operating humidity | 20 to 85% RH (no condensation) | |||
Storage temperature | -20°C to +60°C (paper not included) | |||
Storage humidity | 5 to 95% RH (no condensation) | |||
Detection function | Head temperature detection | Detected by thermistor | ||
Paper out/mark detection | Detected by photo-interruptor | |||
Recommended thermal sensitive paper | High sensitive paper | TF50KS-E2 (Nippon paper) | ||
Standard paper | TF50KS-E2 (Nippon paper) PD150R (Oji paper) FTP-020P0701 (58mm) | |||
Medium life storage paper | TF60KS-F2 (Nippon paper) FTP-020P0102 (58mm) PD170R (Oji paper) AFP220VBB-1 (Mitsubishi paper) | |||
Long life storage paper | PD160R (Oji paper) AFP-235 (Mitsubishi paper) TP50KJ-R (Nippon paper) HA112AA (Nippon paper) |