3 inch Thermal Printer Mechanism PT723F08401 Compatible Fujitsu FTP638 MCL401
♦ Low voltage supply
The voltage used to drive the thermal printer head is equal to the logic voltage, or is driven by a 5 V single power line, the range of operating voltage is 4.2V-8.5V,so four to six NI-Cd batteries or Ni-MH batteries can also be used. Two li-ion batteries can be used.
♦ Compact and lightweight design
The mechanism is compact and light, dimensions: 102mm (width) * 42.6mm (depth) * 21.9mm (height)
♦ Printing with high resolution
A high-density printer head of 8 dots/mm makes the good printing quality
♦ High speed printing
According to driving power and sensitivity of thermal paper, set different printing speed required. Printing speed is 70 mm/ s(max.)
♦ Easy paper loading
Detachable rubber roller structure makess the paper loading easier
♦ Low noise
Thermal line dot printing is used to guarantee low noise printing.
♦ Gaming and Lottery
♦ Gas pumps
♦ Vending Machines
♦ Measuring devices
♦ Medical equipment
♦ Parking Meters
♦ Taxi meters
♦ Ticketing
♦ Voting
♦ Weighing scales
| Series Model | PT723F08401 |
| Print Method | Direct line thermal |
| Resolution | 8 dots/mm |
| Max. Printing Width | 72mm |
| Number of Dots | 576 |
| Paper Width | 79.5±0.5mm |
| Max. Printing Speed | 70mm/s |
| Paper Path | Curved |
| Head Temperature | By thermistor |
| Paper Out | By photo sensor |
| Platen Open | By mechanism SW |
| Cutter Home Positon | By photo sensor |
| Black Mark | NA |
| TPH Logic Voltage | 3.0V-5.5V |
| Drive Voltage | 4.2V - 8.5V |
| Head(Max.) | 2.4A(7.2V/64dots) |
| Paper Feeding Motor | 1.0A |
| Cutter Motor | 1.0A |
| Method | Slide type |
| Paper Thickness | 60um-85um |
| Cutting Type | Full/Partial cut |
| Operating Time (Max.) | Approx. 0.5s |
| Cutting Pitch (Min) | 20mm |
| Cut Frequency (Max.) | 30cuts/min. |
| Pulse Activation | 100 million |
| Abrasion Resistance | 50KM |
| Paper Cutting | 500，000 cuts |
| Operating Temperature | 0 - 50℃ |
| Dimensions(W*D*H) | 102*42.6*21.9mm |
| Mass | 117g |